-40%

SCHWINN STING-RAY 20" WHEEL HURET BICYCLE SPEEDOMETER BIKE SPEEDO HUB DRIVE

$ 15.81

Availability: 27 in stock
  • Wheel Size: 20" (bolt-on axle)
  • Brand: Huret / Schwinn Approved
  • Modified Item: No
  • All returns accepted: Returns Accepted
  • Condition: Please see photos and description below for full details
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Part Number: 08 467 / 08467
  • Item must be returned within: 30 Days
  • Featured Refinements: Schwinn Speedometer
  • Country/Region of Manufacture: France
  • Return shipping will be paid by: Seller

    Description

    (This is a new auction, not a relisting!)
    This is a clean used
    example of a vintage original 20" speedometer drive by Huret, Schwinn part number 08 467, for Sting-Rays or other bikes with 20" front wheels, in good condition and complete with a New Old Stock white dust cap, axle bushing and washer kit. It's had a cleaning and repacking and is in full working order.
    This drive hub is a short-arm (80mm) design, and will fit the slots on the right side of an Atom drum brake if so equipped. Its drive ratio is 1:1.6. This drive is compatible with the chrome Schwinn Approved Huret speedometer and drive cable (not included; see my other auctions for examples of those), as well as Huret-branded bicycle speedometers.
    I'm also including this accessory hardware kit, consisting of:
    One 5/16" axle bushing
    (silver), for Sting-Rays with standard front axles and coaster or caliper brakes
    Three installation washers
    , to be used to clear either the inner face of the front fork or the axle cone nut, as needed
    One foam dust ring seal
    (New)
    If your bike has a 3/8" front axle (such as on tandems, Atom drum brakes or Heavy Duty models), let me know at payment time, and I can substitute a black 3/8" axle bushing for the silver 5/16" bushing shown here.
    This drive is in clean used condition and full working order. I packed it with some fresh grease, and it turns smoothly.
    The drive arms have
    a 3 1/8" (80mm) span, each extending 1 9/16" from the center.
    The axle hole in the center is 7/16" diameter
    .
    I
    am also including a free scanned reprint of an original instruction sheet to help you get it all installed.
    NOTES:
    This is not for quick-release front hubs.
    This is only for bicycles with bolt-on front axles.
    This is not for Stewart-Warner speedometers.
    This is a Huret speedometer part.
    This auction is for the drive hub and hardware kit only.
    If you do not see it in the photos, it is not included!
    Free Shipping is by domestic (U.S.) First Class Package mail.
    Priority Mail is offered if it can get it to you faster. See the Shipping and Handling section of this listing for all rates, including international Shipping charges. Please be sure you know the Shipping charge to your address before bidding or buying. Import duties, taxes and charges are not included in the item price or shipping cost. You will need to pay these charges to your post office. (They are not charges from me.) These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
    Sorry, we do not understate package value, or mark it as a Gift.
    See my other auctions for more vintage Schwinn speedometer items! Except where noted, combined shipping is available for all items ending on the same evening.
    Please do not copy any part of this listing without permission.