SCHWINN MANTA- STING-RAY 22½" HURET BICYCLE SPEEDOMETER BIKE SPEEDO DRIVE CABLE

Description

(This is a new auction, not a relisting!)
This
is an extremely good used
example of a 22½" Schwinn Approved speedometer cable by Huret, just what you need for Huret-built Schwinn speedometer installations on Sting-Rays or other bikes with 20" to 24" front wheels. This is an inch longer than an original 21½" Sting-Ray cable, but will work fine on a Sting-Ray, Fastback or similar bike, and should also be a good fit on 24" Manta Rays and camelback (small-framed) 26" bikes.
This was a service part replacement that was used on various smaller bikes, and can work on a Krate as well, but avoid tight bends, as these cables should not be tightly curved. (See my other listings for a very clean 24½" Krate or Lightweight cable, in an auction scheduled to end 15 minutes after this one.) This is compatible with all Huret-manufactured Schwinn Approved speedometers (usually stamped "MADE IN FRANCE" on the back), as well as Huret's own brand of speedometers. (It does not fit the large, round, 3"-diameter Stewart-Warner speedometers.)
This is a very good used example in good working order, with clean silver gray coloring; flexible, unbroken plastic coating; solidly-attached connector collars and a good core. It is fully flexible, not brittle, and uncoils straight. Everything is still intact, and it works
fine
.
CAUTION:
Please be sure that your speedometer head is turning freely before installing this cable.
Bicycle speedometer cables usually break because the speedometer head has seized up from years of storage.
Replacing the cable will
not
free up the speedo head;
it will simply break the new cable as soon as you start pedaling. To check that your speedometer head is able to turn properly, insert a small flat-blade screwdriver in the back of the speedo head (where the cable goes in), and be sure that the square-holed inner barrel of the speedometer head can turn freely before connecting this cable.
NOTES:
Please see notes above on its condition. The core has been cleaned and lubricated.
This is not for Stewart-Warner speedometers.
This is a Huret speedometer part.
Free Shipping applies to domestic (U.S.) First Class mail only.
See the Shipping and Handling section of this listing for other rates, including international Shipping charges.
Please be sure you know the Shipping costs to your country
before
bidding.
Import duties, taxes and charges are not included in the item price or shipping cost. You will need to pay these charges to your post office. (They are not charges from me.) These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
Sorry, we do not understate package value, or mark it as a Gift.
See my other auctions for more vintage Schwinn speedometer items! Combined shipping is available for all items ending on the same evening.
Please do not copy any part of this listing without permission.